 Command C6 and Command 11-15hp Single Cylinders |
| FREQUENCY |
|
MAINTENANCE REQUIRED |
| Daily or before starting engine |
|
Fill fuel tank
Check oil level
Check air cleaner for dirty*, loose or damaged parts
Check air intake and cooling areas, clean as necessary* |
| |
|
|
| Every 25 hours |
|
Service Pre cleaner element*
(clean in petrol or soapy water then re-oil with a drop of oil squeezed through the foam)
|
| |
|
|
| Every 100 hours |
|
Replace the air cleaner element*
Change the oil
Check spark plug condition and gap
Remove cooling shrouds and clean cooling areas* |
| |
|
|
| Every 200 hours |
|
Change oil filter on the Command 11 - 15hp singles
|
| *Perform this task more often under adverse dusty or dirty working conditions |
| Command V Twins and OHC Engines |
| FREQUENCY |
|
MAINTENANCE REQUIRED |
| Daily or before starting engine |
|
Fill fuel tank
Check oil level
Check air cleaner for dirty*, loose or damaged parts
Check air intake and cooling areas, clean as necessary* |
| |
|
|
| Every 25 hours |
|
Service Pre cleaner element*
(clean in petrol or soapy water then re-oil with a drop of oil squeezed through the foam)
|
| |
|
|
| Every 100 hours |
|
Replace the air cleaner element*
Change the oil
Remove cooling shrouds and clean cooling areas* |
| |
|
|
| Every 200 hours |
|
Change the oil filter
Check spark plug condition and gap on the OHC engines |
| *Perform this task more often under adverse dusty or dirty working conditions |
| Command CS Engines |
| FREQUENCY |
|
MAINTENANCE REQUIRED |
| Daily or before starting engine |
|
Fill fuel tank
Check oil level
Check air cleaner for dirty*, loose or damaged parts
Check air intake and cooling areas, clean as necessary* |
| |
|
|
| Every 25 hours |
|
Service Pre cleaner element*
(clean in petrol or soapy water then re-oil with a drop of oil squeezed through the foam)
|
| |
|
|
| Every 100 hours |
|
Replace the air cleaner element*
Change the oil
Remove cooling shrouds and clean cooling areas* |
| *Perform this task more often under adverse dusty or dirty working conditions |
| Magnum Singles and Twins |
| FREQUENCY |
|
MAINTENANCE REQUIRED |
| Daily or before starting engine |
|
Fill fuel tank
Check oil level
Check air cleaner for dirty*, loose or damaged parts
Check air intake and cooling areas, clean as necessary* |
| |
|
|
| Every 25 hours |
|
Service Pre cleaner element*
(clean in petrol or soapy water then re-oil with a drop of oil squeezed through the foam)
|
| |
| Every 100 hours |
|
Replace the air cleaner element*
Change the oil
Remove cooling shrouds and clean cooling areas*
Check spark plug contition and gap |
| *Perform this task more often under adverse dusty or dirty working conditions |
